Home of the Year Awards
All Systems Synchronized in iPad-controlled Home
For a family that craved simplicity, an AMX control system and six Apple iPads combine to provide simple home management- that’s barely seen.
April 09, 2013 by Lisa Montgomery

Editor’s Note: This profile of one of our Home of the Year winners originally ran in May of 2012. We’re highlighting past winners in anticipation of the May 2013 release of the new Home of the Year winners. You’ll want to check back in May, because the new winners are awesome.

What do you expect to see in the smartest home in the country? A ton of technology, right? Our grand prize Home of the Year definitely has that, but it’s nearly impossible to see any of it. The Bowers & Wilkins (B&W) speakers that stream music to every corner of this 14,000-square-foot abode blend in with the ceilings. The sensors that monitor the temperature of each room are painted to match the wall surfaces. The keypads and touchpanels that operate the home’s lights and audio/ video equipment are virtually nonexistent.

A Fusion of Electronics

The disappearing act was completely intentional, says Sean Weiner, president of Starr Systems Design, the Baltimore, Md.–based firm that tricked out this award-winning house. The custom electronics (CE) pros at Starr collaborated with the homeowners and the interior designer throughout the six-year-long project to ensure that every piece of technology would fuse seamlessly into the decor, which would showcase artwork and materials from around the globe. One product largely responsible for clearing away the technological clutter was the Apple iPad.

“Six years ago when we started planning the design of the house, iPads weren’t around,” says the owner. Naturally, at that point, the best option would have been to install several in-wall touchpanels throughout the residence. AMX, the system that was chosen by Weiner to manage the home’s lights, A/V equipment, music distribution system, pool and spa controls, surveillance cameras and motorized window shades, offered a variety of sleek in-wall touchpanels that would have served the purpose well. But when the iPad arrived, plans changed.

The early-adopter homeowners jumped at the chance to use their iPads to manage their home’s systems. Using AMX’s TPControl app, Starr Systems configured the owners’ six iPads to function just like any of AMX’s home control touchpanels. And Starr Systems left a few of the original AMX touchpanels in places where they felt the owners would benefit from using wall-mounted interfaces (see sidebar).

iPad the Controller

The iPads have since become the family’s de facto interface for managing and controlling their home. An intuitively designed menu presents the owners the key areas of control, like lighting, air conditioning, music, theater and more. From there they can drill down to specific operations for certain devices.

If music is selected from the main menu, the owner can choose where to have it play among the home’s 30 listening zones. They can then select which source they’d like to listen to, such as the Sirius radio tuner or an iPod stationed on a Sonance iPort dock.

Lighting is operated the same way: Go to the lighting page, choose the room, select a group of lights to control, then touch a button to tell that group specifically what to do. “We craved simplicity like this,” says the homeowner, “because we knew other people besides our family would need to understand immediately how to use the system.”

A Work In Progress

Make no mistake. The iPad may be a convenient tool for operating a large home—and an effective means of keeping walls clear of keypads and touchpanels—but what makes this house tick is the powerful AMX NI-4100 NetLinx controller. It’s the brain that ties all of the home’s systems together and allows the owners and Starr Systems to easily change, update and add new components as deemed necessary. This ability to adapt was critical to this project, says the owner, as many of the products available today weren’t around when the project started six years ago. “Blu-ray players weren’t around and neither were iPod docks, so the design was constantly evolving,” the homeowner relates.

Even now, after living in the house for a little over a year, the family continues to update the technology. The four Middle Atlantic equipment racks in a dedicated mechanical room in the basement have available space to hold new A/V components, and closets upstairs are wired with HDMI cabling to support additional racks of equipment. “When we initially wired this house in 2008, we weren’t sure that the HDMI cabling would be able to transmit audio/video signals as far as we needed them to go, but since then, HDMI transceivers have gotten better, so the infrastructure works, and works well,” says Weiner.

Complementary Designs

Basically, everything in this house works really, really well … and looks good doing it. Nearly four dozen B&W speakers were positioned throughout the residence, evenly blanketing every area with music—without being noticed. The interior designer faux painted the grilles of each speaker to blend in perfectly with the unique texture, coloring and pattern of each ceiling surface. Even the dozen outdoor speakers around the patio and pool received the faux treatment. Several James Loudspeaker units were built into the stonework that surrounds the back side of the swimming pool, then painted to match the masonry so they would go undetected.

The owners discovered that there’s yet another effective way to integrate technology into the design of a home. In addition to hiding it or blending it, the technology can be used to complement the decor. Each of the home’s Panasonic, Samsung and Runco flatpanel TVs were selected for their decorative appeal. For example, the bezel of the 50-inch Runco display in the family room was custom-finished by the manufacturer to match the magnificent stone hearth. The 55-inch Samsung 3D LED TV in the master bedroom—the rest of the Samsung units are 3D as well—was selected for its mirrored bezel, a look that would reflect the room’s modern and airy design. The master suite also received two sets of motorized woven wood blinds. These were customized by Lutron Electronics to hug the shape of the huge floor-to-ceiling windows so that no incoming sunlight would interfere with the image on the TV screen.

Follow Electronic House on Facebook and Twitter.

  Find an Installer
  Find custom electronics installers who provide home theater systems,
  lighting, home automation, A/V and more! Click here to get started.


Lisa Montgomery - Contributing Writer
Lisa Montgomery has been writing about home technology for 15 years, with a focus on the impact of electronics on a modern lifestyle.

Systems & Equipment

Control: AMX
Lighting and Shading: Lutron
Video Displays: Panasonic, Runco, Samsung
Video Projector: Digital Projection International
Home Theater Screen: Da-Lite
Audio Processors/Amps: Rotel
Speakers and Subwoofers: B&W, James
Loudspeaker, Velodyne
A/V Sources: Kaleidescape,
Panasonic, Sirius, Sonance, Sony
A/V Racks: Middle Atlantic

Details

Home Size: 14,000 square feet Cost: Undisclosed Project Duration: 6 years (and ongoing) Construction: New

About this integration

Systems Design & Installation: Starr Systems Design, Baltimore, Md.,
http://www.starrsystems.net Builder: Powers Homes, Reistertown, Md., http://www.powerscompanies.
com Interior Design: Patrick Sutton Associates, Baltimore, Md.,
http://www.patricksutton.com


FREE Charter Platinum Membership
Claim your FREE Charter Platinum Membership to EH Network and receive 6 FREE issues of EH Magazine.*
First Name
Last Name
Email Address

We understand your email address is private. By granting you access to the EH Network, you agree to receive email communications from us, including our newsletters. You can manage your subscription at any time in the future.
* The new EH Network launches and your free subscription begins December 2014.